Next deadline: Texas sales and use tax (monthly filers) · Nov 20, 2026 · 3 days leftSee all datesinfo@booksformer.com
← All articlesGUIDE · JOB COSTING

Job costing for HVAC contractors: a simple guide

By the Booksformer team · 7 min read · Updated

HVAC technician inspecting an outdoor condenser

Job costing for an HVAC contractor means tying every dollar of revenue and cost to the job it belongs to, so you see profit for each install, service call and maintenance visit instead of one number for the whole month. You can set it up in QuickBooks Online and your field service app, without buying new software.

What is job costing for an HVAC company?

Job costing is a way of keeping your books so each job has its own small profit and loss. Revenue from the invoice sits on one side. Labor, equipment, parts, subcontractors, permits and callbacks sit on the other. The difference is that job’s gross profit.

Your regular P&L tells you whether the business made money last month. Job costing tells you where it made money and where it lost it. That matters in HVAC because one company often runs very different kinds of work side by side: replacements, repairs, maintenance agreements and after-hours calls. A good month of installs can hide a service department that barely breaks even, and the plain P&L will never show you that.

Which costs should you track on every HVAC job?

Track five costs on every job: labor, equipment and parts, subcontractors, permits and fees, and warranty or callback visits. If one of the five is missing, every job looks more profitable than it really is.

  • Labor. Tech hours on the job, at the loaded rate: the hourly wage plus payroll taxes, workers’ comp and benefits. Using the wage alone is the most common reason job profit looks too good.
  • Equipment and parts. Condensers, furnaces, coils, line sets and the small parts pulled from truck stock. Truck stock is easy to forget because nobody writes a purchase order for it.
  • Subcontractors. Electrical hookups, crane rentals, duct fabrication, or anyone else you pay to help finish the job.
  • Permits and fees. Charged to the job that needed them, not to general overhead.
  • Warranty and callbacks. A return visit belongs to the original job. If you book it as a new job, the first job looks better than it was and the callback looks like a loss on its own.

Rent, office salaries, software, insurance and the owner’s truck are overhead. They are real costs, but they are not tied to one job, so keep them out of job cost and look at them separately.

How do you set up job costing in QuickBooks Online?

Set up each job as a project or a customer sub-account in QuickBooks Online, let your field service app send the invoice to that job, then tag every bill, payroll entry and receipt to the same job. Revenue and cost then meet in one place, and the job profit report builds itself.

In practice it works in four steps:

  1. One job, one record. Each install or service job gets its own project (or sub-customer) in QuickBooks. The name should match the job number in your field service app so the two are easy to compare.
  2. Let the field app send the revenue. ServiceTitan, Housecall Pro, Jobber and FieldEdge can all pass invoices and job details to your accounting software. Fix the sync once and every invoice lands on the right job.
  3. Tag the costs. Supplier bills, subcontractor invoices and receipts are assigned to the job when they are entered. Payroll hours are split by job using the techs’ timesheets.
  4. Use classes or tags for type of work. Mark each job as install, service, maintenance or after-hours, so you can compare margins by type later.

Xero does the same thing with tracking categories or projects, and Zoho Books with reporting tags and projects. The names change; the idea does not.

What does a job cost breakdown look like?

Here is one full job laid out line by line. The numbers are made up to show the method, not taken from a real client.

Example (illustrative numbers): 3-ton AC replacement. Revenue $8,450. Equipment and parts $3,900. Truck stock and materials $200. Labor: 2 techs × 8 hours × $50 loaded rate = $800. Electrical subcontractor $450. Permit $150. Total job cost $5,500. Gross profit $2,950. Margin 34.9%.

Now say the customer calls back two weeks later with a refrigerant leak at a fitting. A tech spends 2 hours fixing it and uses $60 of parts. If that visit is charged to the original job, the job cost becomes $5,660, gross profit $2,790 and the margin 33.0%. That is the true result of the job. If the visit is booked as a new no-charge job instead, the install still shows 34.9% and you never learn that this type of install tends to come back.

The labor line deserves a second look. If the same 16 hours were costed at a $40 wage instead of the $50 loaded rate, labor would show $640 instead of $800, and the job would look $160 more profitable than it was. Across a full month of installs, that gap adds up quickly.

How should you read job costing reports each month?

Read job costing reports by type of work first, then by tech, then by individual job. That order shows you the big patterns before the details, and it keeps the monthly review to a short sitting.

  • By type of work. Compare margins for installs, service calls, maintenance visits and after-hours calls. If one type is consistently lower, look at its pricing or how long those jobs take.
  • By tech or crew. Look for crews that consistently run over the hours you planned. That can mean a training need, a pricing problem, or jobs that were scoped too tight from the start.
  • By job. Sort jobs from lowest margin to highest. The bottom few usually have a story: an unbilled extra, a callback, a part charged twice or a permit nobody passed on.

Do this every month, after the books are reconciled. Job costing on unreconciled books is guesswork, because missing bills and duplicate entries land on jobs too.

What job costing mistakes do HVAC contractors make most often?

The mistakes we fix most often are labor without payroll taxes, truck stock that never reaches a job, a field app and QuickBooks that disagree on revenue, and callbacks booked as new jobs. Each one makes jobs look more profitable than they are.

  • Labor recorded without payroll taxes and benefits. Every job looks better than it is, and your prices drift too low.
  • Truck stock never assigned to a job. Parts are bought in bulk, sit on the truck and get used without a record, so they end up in overhead.
  • Field app and QuickBooks showing different revenue for the same month. Usually caused by a broken sync, deleted invoices or payments matched to the wrong job.
  • Callbacks booked as new jobs. The original job looks clean and the warranty cost disappears.
  • Maintenance agreements not tracked separately. Agreement revenue gets mixed in with repair work, so you cannot tell whether the agreements pay for the visits they promise.

Frequently asked questions

Do I need new software for job costing?

No. Job costing works inside QuickBooks Online, Xero or Zoho Books, connected to a field service app such as ServiceTitan, Housecall Pro, Jobber or FieldEdge. The work is in the setup and in tagging every cost to a job each month, not in buying another system.

What is the difference between job cost and overhead?

Job cost is anything you spent because of one specific job: its labor, equipment, parts, subcontractors, permits and callbacks. Overhead is what you pay to run the business no matter which jobs you do, like rent, office staff, software and insurance. Keep them separate so job margins stay honest.

How often should I review job costs?

Once a month, right after the books are reconciled. Reviewing more often tends to mean looking at incomplete numbers, and reviewing less often means problems with pricing or crews run for a whole season before anyone notices.

Should maintenance agreements be job-costed?

Yes. Track agreement revenue and the cost of the visits it covers together, so you can see whether each agreement pays for itself. Agreement revenue is often collected up front, so it also helps to spread it over the months the visits happen.

Can Booksformer set up job costing for my HVAC business?

Yes. Job costing by job and tech, AP and AR and field service app sync are part of our Growth plan at $299 a month. We work inside your own QuickBooks Online, Xero or Zoho Books, and the first month is risk-free. Book a free 30-minute call and we will send a fixed monthly quote within 24 hours.

More for HVAC shops: HVAC bookkeeping · Pricing · Tax due dates